manualshive.com logo in svg

Toshiba Strara CTX Series, Installation And Maintenance Manual, Page: 228 / 290

Share
Download
Toshiba Strara CTX Series Installation And Maintenance Manual Download Page 228

Station Apparatus

7-30

Strata CTX I&M  September 2002

◆

Conference/Transfer (

Cnf/Trn

) button

◆

Message Waiting LED

◆

Hold

 button

◆

20 Speed Dial number memory (in addition to 40 station speed dials)

Precautions

Before you read anything else, please observe the following:

Rechargeable Nickel Metal Hydride Batteries Must Be Recycled or Disposed of 
Properly

◆

Residents of Minnesota should contact 1-800-225-PRBA for information concerning reclamation 
and disposal of Rechargeable Metal Hydride batteries.

◆

Residents outside of Minnesota should contact their local authorities for information concerning 
reclamation and disposal of Rechargeable Metal Hydride batteries.:

CAUTION!

To power your Toshiba DKT2004-CT Cordless base unit, use only UL Listed AC 
Adapter Model AD-9590 Class 2 Power Supply.
Ratings are:
Input:120VAC 14W
Output:10VDC 500mA

Important!

Charge your battery for 10 hours before using your new Cordless Digital Telephone.

WARNING!

Toshiba 

does not

 represent this unit to be waterproof. To reduce the risk of 

fire, electrical shock, or damage to the unit, 

do not

 expose this unit to rain or 

moisture.

WARNING!

Regarding DKT2004-CT Rechargeable Nickel Metal Hydride Battery:

➤

The Rechargeable Nickel Metal Hydride contained in this equipment may 
explode if disposed of in a fire.

➤

Do not short circuit the battery.

➤

Do not charge the Rechargeable Nickel Metal Hydride used in this 
equipment in any charger other than the one designed to charge this 
battery as specified in this Guide. Using another charger may damage the 
battery, or cause the battery to explode.

WARNING!

To reduce risk of fire, use only Model EXP9590 batteries.

Summary of Contents for Strara CTX Series



































































































































































































































































































Reviews:

No comments