background image

 

7

Checking Communication 

Check NIC is receiving power 

Check the LED indicators on the Toshiba MFP’s NIC: 

 

Green LED is lit while the NIC is properly connected to the LAN 

 

Amber LED blinks while data is being communicated 

Check the PC where Network Viewer, ImageVision2000 or SmartLink2000 will run 
can “see” the Toshiba MFP 

At the Network Viewer/ImageVision2000/SmartLink2000 PC… 

 

Click “Start, Run” 

 

Type: 

PING  -T  aaa.bbb.ccc.ddd 

Where aaa.bbb.ccc.ddd is the IP of the Toshiba MFP 

 

Press ENTER 

The PC will then send, at regular intervals, a small message to the Toshiba MFP’s IP and report whether 
a response is received or not (if not a timeout will be reported) and if so how quickly. 
Responses should be received to 99% of messages and should be received quickly, say less that 10ms 
ideally. 
If no responses are ever received: 

 

Check the IP address set on the Toshiba MFP matches the IP used in the PING command. 

 

Check that no firewall on the PC is preventing the message going out from the PC or coming in from 
the Toshiba – maybe disable any personal firewall on the PC as a test to see if the results change. 

If responses 

sometimes 

timeout and aren’t received: 

 

Examine the network cabling and infrastructure (including HUBS) and try pinging other PCs and 
devices to see if they respond any better. 
If other PCs or devices respond more reliably then maybe there’s a problem with the Toshiba MFP’s 
NIC or the cables between the PC issuing the PING command and the Toshiba MFP – maybe try 
different cable to the Toshiba MFP or a different port in a HUB if one is being used. 

Press CTRL and C to stop the PING program. 

Check for SMTP Server running on the PC intended to run Network Viewer, 
ImageVision2000 or SmartLink2000’s device driver 

Before installing Network Viewer, ImageVision2000 or SmartLink2000 or while 
neither are running 

At the Network Viewer/ImageVision2000/SmartLink2000 PC… 

Windows 95(OSR2)/98/Me/NT4: 

 

Click “Start, Run” 

 

Type: 

TELNET  127.0.0.1  25 

Summary of Contents for SmartLink e-STUDIO16















Reviews: