38
CLOCK SET
SYSTEM SETUP
LANGUAGE/
üáúIK
RF OUT
[K]
AV2
[ AV]
SELECT :
/
ENTER : ENTER
MENU
EXIT :
5
1
2
3
4
• Select the “AV2” in menu
screen in the same way as
the step 1~2 on page 15.
Then press
ENTER
to select
AV mode.
TV-Scart socket
VCR/DECODER
SCART socket
(not supplied)
Recording unit
TV
VCR
Press
AUX
on the recording
unit repeatedly until L3
appears.
Playback unit
SD-46VSR
OR
Playback on
camera
Playback unit
(not supplied)
Recording unit
(not
supplied)
1
2
3
Duplicating a Video Tape
When you try to connect with a cable, make sure the power of both units have been turned off.
Connect the recording unit with the TV. Therefore you can just watch what the recording unit is recording.
Load a blank cassette tape with the erase prevention tab
intact into the recording DVD/VCR. Load the previously
recorded cassette tape into the playback VCR or a video
camera.
Use
AUX
or
CH +/–
of the recording DVD/VCR to select the
“L1”, “L2” or “L3” instead of the preset channel.
L1 = TV-RGB/Composite Scart Socket
L2 = VCR/DECODER Scart Socket
L3 = Front AV jacks
Press
REC/OTR
and then
PAUSE/STEP
of Recording
unit.
Press PLAY-button and then PAUSE/STEP-button of Play-
back unit. Now you can see the still picture of the scene that
you wish to duplicate.
Press
PAUSE/STEP
of both units simultaneously to start
the duplicating.
Note:
Before starting the duplicating process, select the proper
tape speed using
SP/LP
. For a pre-recorded tape the
correct tape speed will be set automatically during
playback.
Duplicating a disc material onto a video tape
You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.
If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark “
” will appear
on the screen for approx. 4 seconds. See page 41 for more information about the DVD playback.
Preparation:
• Load a cassette tape with the erase prevention tab
intact.
• Select the tape speed in the VCR mode. (see P.30)
• Load a disc you wish to duplicate.
Press
DVD
to select the DVD mode. (The DVD indi-
cator will light)
Press
PLAY
to start the disc playback.
During disc playback, press
REC/OTR
.
Notes:
• You can set the duplicating time using the OTR-
function. At step
3
above press
REC/OTR
repeatedly
until the desired duplicating time appears on the
screen.(P.32)
• Only non-protected PAL discs can be dubbed to
video tape.
• Do not insert the Media card during the duplicating.
In this case, a card material is duplicated onto a
video tape.
Connection with second Video recorder or Video camera
(not
supplied)
