24
Basic setup
Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
Clock setting
The Auto Clock function will automatically set the built-in clock (Month,
Day, Year and Time) when the DVD/VCR is connected to an Antenna or
Cable system and it is turned off. As the DVD/VCR searches for a
receivable station in your area and it receives a broadcast signal for
Auto Clock, the Auto Clock needs several minutes to set itself.
Preparation:
• Turn ON the TV and set to the video input mode.
• Press DVD/VCR to select the VCR mode. (The VCR
indicator will light.)
1
Auto clock setting
Plug the AC Power cord to the AC outlet.
2
Make sure the DVD/VCR is turned off.
• If you press POWER, the Auto Clock
set is not effective.
3
Wait at least three minutes and press
POWER.
4
Press CALL to check the clock on the
screen.
5
If the clock is not set, check the antenna
condition. The auto clock may not function
properly if the reception condition is not
good.
6
Auto clock adjustment
To set auto clock to off
The auto clock adjustment will be performed at
12:00 PM everyday if you turn off the DVD/VCR.
• If you use a cable box and you want auto clock
adjustment to be performed, the cable box must be
left on.
• The auto clock adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):
Press VCR MENU.
1
Press SET + or – to select “SYSTEM SET
UP”, then press ENTER.
2
Press SET + or – to select “AUTO CLOCK”.
3
Press ENTER to select “OFF”.
4
Press VCR MENU repeatedly to return to the
normal screen.
• When the AUTO CLOCK is set to
“OFF”, the Auto Clock adjustment
does not function.
• Set the clock manually
26
.
5
CH 125
8 : 47
AM
MON
00 : 00 : 00 SP
STEREO SAP
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SET UP
SYSTEM SET UP
〈
+/-/ENTER/MENU
〉
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON
OFF
ON
OFF
〈
+/-/ENTER/MENU
〉
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON
OFF
ON
OFF
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SET UP
SYSTEM SET UP
POWER
2, 3
2, 4
1, 5
CALL
25
Basic setup
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SET UP
SYSTEM SET UP
Press VCR MENU.
1
Press SET + or – to select “SYSTEM SET
UP”, then press ENTER.
2
Press SET + or – to select “STANDARD TIME”,
then Press ENTER.
3
Press SET + or – to select your time zone,
then press ENTER.
4
Press VCR MENU twice to return to the
normal screen.
5
In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may
recognize the wrong station for the Auto Clock set.
To correct the situation:
Notes:
• To be able to select the standard time, the clock must first
be set by “AUTO CLOCK” once.
• If you live in Newfoundland and the Auto Clock does not
function properly, set the AUTO CLOCK menu option to OFF
and set the clock manually.
Press VCR MENU.
Press SET + or – to select “SYSTEM SET
UP”, then press ENTER.
1
Press SET + or – to select “DAYLIGHT
SAVING TIME”, then press ENTER.
2
Press SET + or – to select one of the
options, then press ENTER. Press VCR
MENU until the MENU screen is cleared.
3
Notes:
• When shipped from factory, the DAYLIGHT SAVING
TIME is set to “AUTO” position.
• When the clock is not set, Daylight Saving Time setting
is not available.
• When there is no Daylight Saving Time in your area,
always select “OFF” position in step 3.
When you want to set the Daylight
Saving Time manually, on the first
Sunday in April you set to “ON”, and
on the last Sunday in October you
set to “OFF”.
ON:
OFF:
AUTO:
for manual setting
(forward one hour)
for manual setting
(back one hour)
for automatic setting
(read XDS in the signal)
〈
+/-/ENTER/MENU
〉
DAYLIGHT SAVING TIME
ON
OFF
AUTO
ATLANTIC
: GMT–4hours
EASTERN
: GMT–5hours
CENTRAL
: GMT–6hours
MOUNTAIN : GMT–7hours
PACIFIC
: GMT–8hours
ALASKA
: GMT–9hours
HAWAII
: GMT–10hours
AUTO
: AUTO SET
(GMT: Greenwich Mean Time)
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SET UP
SYSTEM SET UP
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SET UP
SYSTEM SET UP
〈
+/-/ENTER/MENU
〉
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON
OFF
ON
OFF
〈
+/-/ENTER/MENU
〉
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON
OFF
ON
OFF
To set daylight saving time
You can set the Daylight Saving Time automatically or
manually.
To set standard time
26
Basic setup
2-4
Press VCR MENU.
EXAMPLE:
Setting the clock to "8:30 AM" March,
23 (SAT), 2002.
1
8 : 30
AM
SAT
Manual clock setting
After setting the clock, date and time starts
functioning automatically.
6
Note:
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET + or –.
Press SET + or – to select “SYSTEM SET
UP”, press ENTER.
2
Press SET + or – to select “CLOCK SET”,
then press ENTER.
3
Press SET + or – to set the month, then press
ENTER.
4
Set the day, year and time as in step 4.
5
〈
+/-/ENTER/MENU
〉
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON
OFF
ON
OFF
〈
+/—/ENTER/CANCEL/MENU
〉
MONTH
DAY
YEAR
TIME
3
1 (WED)
2000
12 : 00
AM
〈
+/—/ENTER/CANCEL/MENU
〉
MONTH
DAY
YEAR
TIME
3
23 (SAT)
2002
8 : 30
AM
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SET UP
SYSTEM SET UP
Clock setting (continued)
If the auto clock process did not set the date and time correctly, you
must set them manually for timer recordings and daylight saving time.
2-4
1
27
Basic setup
Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR’s memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu
option is in the CATV mode.
Press VCR MENU. Press SET + or – to select
“CH SET UP”, then press ENTER.
Preparation:
• Turn ON the TV and set to the video input mode.
• Press DVD/VCR to select the VCR mode. (The
VCR indicator will light.)
1
Press SET + or – to select “TV/CATV”.
2
〈
+/-/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SET UP
SYSTEM SET UP
TV/CATV selection
Setting channels automatically
Repeat left step 1 and press SET + or – to
select “AUTO CH MEMORY”.
1
Press ENTER.
The auto tuning will start. The chan-
nel display will count up and when fin-
ished, the screen returns to normal.
2
〈
+/—/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
CH 002
Note:
You can’t select “CH SET UP” if you set the channel to “L1” or
“L2”.
Press ENTER to select the TV or CATV mode.
The arrow indicates the selected mode.
3
Press VCR MENU until the menu screen is
cleared.
4
TV - VHF/UHF channels
CATV - CABLE TV channels
〈
+/-/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
1-2
1, 3
1, 4
