DISASSEMBLY INSTRUCTIONS
B1-1
1.
1-1: TOP CABINET/FRONT CABINET (Refer to Fig. 1-1)
REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1.
2.
3.
4.
Remove the 5 screws
1
.
Remove the Top Cabinet in the direction of arrow (A).
Unlock the 4 supports
2
.
Remove the Front Cabinet in the direction of arrow (B).
Fig. 1-1
1-2: POWER PCB (Refer to Fig. 1-2)
1.
2.
3.
Disconnect the following connectors: (CP4001, CP4002).
Remove the 3 screws
1
.
Remove the Power PCB in the direction of arrow.
Fig. 1-2
1.
2.
3.
4.
Make the short circuit on the position as shown Fig. 1-3
using a soldering. If you remove the DVD Deck with no
soldering, the Laser may be damaged.
Disconnect the following connectors:
(CP2601, CP2602, CP2603).
Remove the 4 screws
1
.
Remove the DVD Deck in the direction of arrow.
1-3: DVD DECK (Refer to Fig. 1-3)
Fig. 1-3
1-4: DVD PCB (Refer to Fig. 1-4)
1.
2.
3.
Remove the 4 screws
1
.
Remove the 3 screws
2
.
Remove the DVD PCB in the direction of arrow.
Fig. 1-4
NOTE
When the installation of the DVD Deck, remove all the
soldering on the short circuit position after the connection of
Pick Up PCB and DVD PCB connector.
1
1
1
2
2
DVD PCB
2
1
1
1
Power PCB
1
1
1
1
1
Make the short circuit
using a soldering.
Pick Up PCB
1
(B)
(A)
1
1
1
2
1
Top Cabinet
Front Cabinet
2
2
2
DVD Deck
