Toshiba SD-37VSR User Manual Download

Page: 41 / 63

Marking the scenes (DVD/VCD)

Returning to the scenes (DVD/VCD)

Press MARKER during playback or stop mode.

Marking desired scenes

Notes:

• Some discs may not work with the marking

operation.

• The marking is cancelled when you open the disc

tray or turn the power off.

• Some subtitles recorded around the marker may fail

to appear.

• In case of Video CD with PBC, Marker function is

prohibited.

To cancel the Marker

Follow the above steps 1~2, then press

CLEAR

Press MARKER during playback.

Select the blank Marker using

Then press ENTER at the desired scene.

• Repeat this procedure to set the

other 2 scenes.

Press MARKER to clear this display.

Press ENTER.

Playback starts from the marked
scene.

Press

to select the Marker 1-3.

The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.

Marker 2

Marker 1

Marker 3

Marker 2

Marker 1

Marker 3

16
08

25
31

01
02

Marker 2

Marker 1

Marker 3

27
16
08

54
25
31

00
01
02

Marker 2

Marker 1

Marker 3

Summary of Contents for SD-37VSR
































































Search results

Summary of Contents for SD-37VSR

Reviews:

Related manuals for SD-37VSR

Brands by name

Popular brands

Toshiba SD-37VSR, User Manual

Search results

Summary of Contents for SD-37VSR

Reviews:

Related manuals for SD-37VSR

Brands by name

Popular brands