37
Others
Symptom
Cause
Correction
The DVD video
player does not
start playback.
Playback does not
follow the course
of the disc’s
program.
Buttons do not
work.
The
The logo and
playing picture of
DVD player
become poor.
The DVD player
tray does not
open.
remote
control does not
work properly.
• No disc is inserted.
• An unplayable disc is inserted.
• The disc is placed upside down.
• The disc is not placed within the
guide.
• The disc is dirty.
• The parental lock function is set.
• It is in the mode of repeat
playback, memory
playback, etc.
• Power supply fluctuations or other
abnormalities such as static
electricity may interrupt correct
operations.
• The remote control is not pointed
at the remote sensor of the DVD
video player.
• The remote control is too far from
the DVD video player.
• The
• Adjusted sharpness is too small
or too large.
• Tray Lock mode has been enable.
batteries in the remote
control are exhausted.
• Insert a disc.
• Insert a playable disc. (Check the disc
type and color system.)
• Place the disc with the playback side
down.
• Place the disc correctly inside the
guide on the disc tray.
• Clean the disc.
• Cancel the parental lock function or
change the parental lock level.
• These operations may prevent a proper
progress of the contents.
• Press and hold the ON/STANDBY
button on the front panel for more than
about 3 seconds. The DVD video player
turns off. Press the button again to turn
it on. If the buttons still do not work,
disconnect the power plug and insert it
into the wall outlet again
.
• Point the remote control at the remote
sensor of the DVD video player.
• Operate the remote control within
about 7 m.
• Replace
• Adjust Brightness or Sharpness to a
certain level.
• Disable the Tray Lock function.
the batteries with new ones.
