1-29
Operation with tape (Continued)
One-touch Timer Recording (OTR)
Your DVD+VCR allows you to make recordings
using a variety of simple methods:
One-touch Timer Recording (OTR)
start record-
ing immediately for a set period of time or until the
video cassette runs out.
Your DVD+VCR incorporates Long Play (LP) which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be a slight loss in picture and
sound quality when using LP.
1. Make sure that you have correctly connected your
DVD+VCR as described earlier in this book.
Press
++/
/1
1
to turn on your DVD+VCR.
2. Insert a video cassette with protection tab into your
DVD+VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
3. Press
PR/TRK (
3
3
or
4
4
)
to select the
programme
number
you wish to record.
You may also directly select programme number
using the
numbered buttons
on the remote control.
4. If you wish to record directly from the SCART or
RCA jacks, press
INPUT SELECT
repeatedly until
the input you wish to record from is displayed.
AV 1
for recording from EURO AV1 SCART socket
on the rear of your unit.
AV 2
for recording from EURO AV2 SCART socket
on the rear of your unit.
AV 3
for recording from VIDEO IN and AUDIO IN
(Left & Right) jacks on the front of your unit.
5. Press
SP/LP
if you wish to record in Long Play or
Standard Play.
SP will produce improved picture and sound quality,
however LP will provide twice as much recording
time as SP.
6. Press
REC/OTR
on the remote to start recording.
Press
z
z
REC
on your unit or press
REC/OTR
on
the remote several times. Each successive press
will increase the record time by 30 minutes until you
reach a maximum of 9 hours.
7. Press
PAUSE/STEP (
X/C
)
to avoid recording
unwanted scenes.
Press
PAUSE/STEP (
X/C
)
to continue recording.
Tapes can be paused for up to 5 minutes; RECP will
be displayed when a tape is paused. After 5 minutes
your DVD+VCR will stop recording to prevent dam-
aging the tape or your DVD+VCR.
8. Press
STOP (
x
x
)
to end recording.
Press
EJECT (
)
.
Notes:
•
If you do not wish to record on a tape (this can hap-
pen quite easily by accident!) remove the protection
tab on the back edge of the video cassette.
•
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive tape.
•
Remember you can record one programme while
watching another by starting your instant recording,
press
TV/VCR
to select TV mode and then selecting
a different channel on your TV.
OPERA
TION
Summary of Contents for SD-26VESE
Page 41: ...1 47 ...