- 16 -
EN
DVD PLAYBACK
Preparations
Turn on your audio system if the player has been connected to an audio system and turn on your TV.
Basic Play
1. Press on the ON/STANDBY button
2. Press OPEN/CLOSE ( ) to open the disc tray.
3. Place a disc onto the tray
Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides,
and place it in its proper position.
4. Press OPEN/CLOSE ( ) .
The disc tray closes and play commences if the disc does not have any menus recorded on it.
A menu may appear on the TV screen after a few moments or the film may start immediately after the introduction of the
Film Company. This behaviour depends on the disc content and may change.
¥
NOTE:
Step 5 and 6 are available only when a menu is recorded on the disc.
5. Press
3
/
4
/
6
/
5
or the number button(s) to select the preferred title.
6. Press ENTER.
Playback of the selected item now starts.The played item may be a motion picture, a still picture or another submenu
depending on the disc.
¥
NOTE:
When using menus, the disc controls the behaviour of the player.
For stopping play and returning to the menu screen (when a menu is available on the disc), press MENU or TOP MENU
button depending on the disc. Play is suspended, and the Disc menu screen is displayed.
After operation
When the unit is not in use, remove the disc and press ON/STANDBY to turn off the unit.
¥
NOTE:
The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item. When
no further selections are to be played, be sure to press the STOP (
<
) button to clear the menu display.
If the disc is placed in upside down ( and it is a single sided disc), the VFD display on the player will indicate bAd dI.
For your reference:
If an action corresponding to a button is prohibited, the
´
symbol appears.
Bookmark
During playback of DVD, VCD (with PBC off, see page 20) or CD DA you can mark three positions and start playback
from those positions later.
Saving the position
1. Press PROGRAM button during playback of a DVD, VCD or CDDA.
2. Bookmark screen is displayed.
3. Select the bookmark in which you want to save the current position by using the arrow keys.
4. Press ENTER to save the current playback position.
The time is saved to the bookmark selected and is displayed in the list.
