Toshiba SD-110EB Service Manual Download Page 8

Page: 8 / 120

Introduction

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11.Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.

12. Unplug this apparatus during lightning storms or when unused for long periods

of time.

S3125A

Summary of Contents for SD-110EB

























































































































Search results

Summary of Contents for SD-110EB

Reviews:

Related manuals for SD-110EB

Brands by name

Popular brands

Toshiba SD-110EB, Service Manual

Search results

Summary of Contents for SD-110EB

Reviews:

Related manuals for SD-110EB

Brands by name

Popular brands