Toshiba SD-110EB Service Manual Download Page 71

Page: 71 / 120

1-3-2. Loading Belt

1. Remove the gear (1) by releasing the claw.

2. Remove the gear (2).

3. Remove the gear (3) and the loading belt (4).

4. Replace the loading belt (4) with a new one.

5. When mounting, perform the reverse order of the

removal.

Note:

• When mounting the loading belt (4), twisting and

attaching of a grease, etc. are not allowed.

Fig. 2-1-14

Gear (1)

Gear (2)

Loading belt (4)

Gear (3)

Claw

Mechanism
chassis assembly

1-3-3. Loading Motor

1. Remove the loading belt. (Refer to item 1-3-2.)

2. Remove two screws (1) and two claws. Then remove

the loading motor (2) (with the loading motor PC

board (3) attached).

3. Desolder the terminal section of the loading motor (2)

and remove the loading motor PC board (3).

4. Replace the loading motor (2) with a new one.

5. When mounting, perform the reverse order of the

removal.

Note:

• When replacing the loading motor, meet the polarity

phase of the terminals. (Mount the motor with the

label positioned as shown in Fig. 2-1-15.)

Fig. 2-1-15

Screws (1)

Mechanism
chassis assembly

Claws

Loading motor (2)

Motor label
side

Loading motor
PC board (3)

Desolder

Summary of Contents for SD-110EB

























































































































Search results

Summary of Contents for SD-110EB

Reviews:

Related manuals for SD-110EB

Brands by name

Popular brands

Toshiba SD-110EB, Service Manual

Search results

Summary of Contents for SD-110EB

Reviews:

Related manuals for SD-110EB

Brands by name

Popular brands