background image

Please note that an adaptor is required to use miniSD/microSD Card.
Please note that not all memory media have been tested and verified
to work correctly. Therefore, it is not possible to guarantee that all
memory media will operate properly.
The slot does not support Magic Gate functions.

Figure 4-11 Examples of memory media

Secure Digital (SD)
Card

microSD card
adaptor and microSD
card

MultiMediaCard (MMC)

Memory media

This section provides the important safety precautions in order to handle
your memory media.

Points to note about the memory media card

SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music
Initiative), which is a technology adopted to prevent unlawful copy or
playback of digital music. For this reason, you cannot copy or playback
protected material on another computer or other device, and you may not
reproduce any copyrighted material except for your personal enjoyment.
Below is a simple explanation for distinguishing SD memory cards from
SDHC and SDXC memory cards.

SD, SDHC and SDXC memory cards appear the same externally.
However, the logo on memory cards is different, so pay careful
attention to the logo when purchasing.

The SD memory card logo is (

).

The SDHC memory card logo is (

).

The SDXC memory card logo is (

).

The maximum capacity of SD memory cards is 2GB. The maximum
capacity of SDHC memory cards is 32GB. The maximum capacity of
SDXC memory cards is 64GB.

Card Type

Capacities

SD

8MB, 16MB, 32MB, 64MB, 128MB, 256MB,
512MB, 1GB, 2GB

SDHC

4GB, 8GB, 16GB, 32GB

User's Manual

4-19

Summary of Contents for Satellite U940

























































































































Reviews: