Use a point size 0 Phillips screwdriver to remove and fasten the screws -
the use of an incorrect screwdriver can damage the screw heads.
Installing a memory module
To install a memory module, follow the steps as detailed below:
1.
Click
Power
in the
Settings
charm, and then click
Shut down
while
holding down the
SHIFT
key - ensure that the
Power
indicator is off.
2.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
3.
Close the display panel.
4.
Turn the computer upside down and remove the battery pack (refer to
5.
Loosen the screw securing the memory module cover in place -
please note that the screw is attached to the cover in order to prevent
it from being lost.
6.
Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-7 Removing the memory module cover
2
1
1. Memory module cover
2. Screw
Product appearance depends on the model you purchased.
User's Manual
4-15
Summary of Contents for Satellite U940
Page 1: ...User s Manual U940 ...
Page 4: ...User s Manual iv ...
