manualshive.com logo in svg

Toshiba Satellite U500, Maintenance Manual

The Toshiba Satellite U500 is a powerful laptop designed for productivity and entertainment. Its sleek design and advanced features make it a must-have device for professionals and tech enthusiasts. Explore all its functions with the comprehensive (Spanish) Manual del Usuario, available for free download on our website.

Share
Download
background image

 

4  Replacement Procedures 

4.2  Battery pack 

Removing the Battery pack 

To remove the battery pack, follow the steps below and refer to Figure 4-1. 

CAUTION:  When handling battery packs, be careful not to short-circuit the terminals.  

Also do not drop, hit or apply impact, do not scratch, break, twist or bend 
the battery pack. 

1.

 

Turn off the power of the computer. 

2.

 

Disconnect the AC adapt

e

r and other external devices from the computer. 

3.

 

Turn the computer face down. 

4.

 

Release the 

battery lock

. Pull out the 

battery pack

 while sliding the 

battery latch 

as shown in the following figure. 

NOTE:  For environmental reasons, do not throw away a spent battery pack. 

 

Battery latch 

Battery lock 

 

Figure 4-1   Removing the battery pack 

 

 

 

4-12 Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D 

 Maintenance Manual 

Summary of Contents for Satellite U500














































































































































































































































































Reviews:

No comments

Related manuals for Satellite U500

Panasonic CF-19 series Reference Manual preview
CF-19 series
Brand: Panasonic Pages: 80
IBM THINKPAD I 1200 - Hardware Maintenance Manual preview
THINKPAD I 1200 -
Brand: IBM Pages: 233
Panasonic Toughbook CF-52EKMBGAM Operating Instructions Manual preview
Toughbook CF-52EKMBGAM
Brand: Panasonic Pages: 22
Panasonic Toughbook CF-Y5LWEZABM Operating Instructions Manual preview
Toughbook CF-Y5LWEZABM
Brand: Panasonic Pages: 40
Razer Blade Pro RZ09-0287 User Manual preview
Blade Pro RZ09-0287
Brand: Razer Pages: 18
Acer TravelMate 620 Series User Manual preview
TravelMate 620 Series
Brand: Acer Pages: 92
Acer TravelMate 630 series Guía Del Usuario preview
TravelMate 630 series
Brand: Acer Pages: 100
Acer TravelMate 8481 Manual preview
TravelMate 8481
Brand: Acer Pages: 76
Fujitsu LIFEBOOK U7312 Operating Manual preview
LIFEBOOK U7312
Brand: Fujitsu Pages: 89
Fujitsu LIFEBOOK U904 Operating Manual preview
LIFEBOOK U904
Brand: Fujitsu Pages: 80
Fujitsu LIFEBOOK U745 Operating Manual preview
LIFEBOOK U745
Brand: Fujitsu Pages: 108
Fujitsu LIFEBOOK T937 Operating Manual preview
LIFEBOOK T937
Brand: Fujitsu Pages: 126
Fujitsu LifeBook U772 User Manual preview
LifeBook U772
Brand: Fujitsu Pages: 320
Fujitsu LIFEBOOK U5x4 Operating Manual preview
LIFEBOOK U5x4
Brand: Fujitsu Pages: 67
Fujitsu LIFEBOOK TH4410 Operating Manual preview
LIFEBOOK TH4410
Brand: Fujitsu Pages: 124
Fujitsu LIFEBOOK U727 Operating Manual preview
LIFEBOOK U727
Brand: Fujitsu Pages: 121
Fujitsu Lifebook TH700 User Manual preview
Lifebook TH700
Brand: Fujitsu Pages: 413
Fujitsu LifeBook U772 Operating Manual preview
LifeBook U772
Brand: Fujitsu Pages: 64

Brands by name

Popular brands

Load more brands