Toshiba Satellite Pro C650 Maintenance Manual Download Page 78

Page: 78 / 218

3.3 Option

3 Diagnostic Programs

3.3 Options

3.3.1 Overview

In Service Diagnostics, with the

Options

menu user can configure the batch

parameters, test item’s parameters and those parameters created by the LOG file.

Options Menu Notes:

•

Select All/None Items

Switch between selecting all test items and selecting none. The hot key is

•

Test Selected Items

Execute all selected test items in this editor. The hot key is

If “Interactive” option in batch parameters has not been selected, a warning
message would be shown as below:

Satellite/Satellite Pro/C650/C655 Maintenance Manual

Summary of Contents for Satellite Pro C650



























































































































































































































Search results

Summary of Contents for Satellite Pro C650

Reviews:

Related manuals for Satellite Pro C650

Brands by name

Popular brands

Toshiba Satellite Pro C650, Maintenance Manual

Search results

Summary of Contents for Satellite Pro C650

Reviews:

Related manuals for Satellite Pro C650

Brands by name

Popular brands