manualshive.com logo in svg

Toshiba Satellite Pro C650, Maintenance Manual

The Toshiba Satellite Pro C650 is a versatile laptop designed for professional use. With its sleek design and reliable performance, this laptop is perfect for users seeking a reliable companion for work or leisure. Enhance your experience by easily downloading the free user manual from manualshive.com to fully maximize its capabilities.

Share
Download
background image

2.7 Display 

2 Troubleshooting 

2.7  Display 

To check if the computer’s display is defective or malfunctioning, follow the troubleshooting 
procedures below as instructed.  

Procedure 1  External Monitor Check 

Procedure 2  Test Program Check 

Procedure 3  Connector Check and Replacement Check 

Procedure 1  External Monitor Check 

Connect an external monitor to the computer's external monitor port, then boot the computer.  
The computer automatically detects the external monitor even if resume mode is enabled. 
If the external monitor works correctly, the internal LCD, LCD/FL cable, or FL may be faulty.  
Go to Procedure 3. 
If the external monitor appears to have the same problem as the internal monitor, the system 
board may be faulty.  Go to Procedure 2. 

Procedure 2  Test Program Check 

Insert the diagnostics bootable CD in the computer's CD ROM, turn on the computer and run the 
test.  See Chapter 3 for information on how to perform the test. 
If an error is detected in the test, go to Procedure 3.  If no error is detected, the display itself is 
normal. 
 

Procedure 3  Connector Check and Replacement Check 

The display unit has an LCD module, Fluorescent lamp (FL), panel close switch and FL inverter 
board.  Any of the components or their connections may be defective.  Disassemble the computer 
following the steps described in Chapter 4, then perform the following checks: 
(1)

 

  If the FL does not light, perform Check 1. 

(2)

 

  If characters or graphics are not displayed normally, perform Check 5. 

(3)

 

  If the FL remains lit when the display is closed, the panel close switch may be defective.  
Perform Check 8. 

 

Check 1 

Make sure the following cables have been firmly connected to the system 
board and FL inverter board. 

FL

FL inverter board

System board

CPU

HV cable

LCD/FL cable

 

 

 

If any of the cables is loose or off, reconnect it firmly and return to Procedure 
3.  If there is still an error, perform Check 2. 

Check 2 

The LCD/FL cable may be faulty. Replace it with a new one and return to 
Procedure 3.  If there is still an error, perform Check 3. 

Check 3 

The FL may be faulty.  Replace it with a new one and return to Procedure 3.  

2-15 

 

Satellite/Satellite Pro/C650/C655       Maintenance Manual 

Summary of Contents for Satellite Pro C650



























































































































































































































Reviews:

No comments

Related manuals for Satellite Pro C650

Gateway M520 Replacement Manual preview
M520
Brand: Gateway Pages: 4
eMachines E732 Service Manual preview
E732
Brand: eMachines Pages: 192
ASROCK Multi Book G22 User Manual preview
Multi Book G22
Brand: ASROCK Pages: 40
Zenith Z-170 Owner'S Manual preview
Z-170
Brand: Zenith Pages: 147
Acer Aspire 7735ZG Series Quick Manual preview
Aspire 7735ZG Series
Brand: Acer Pages: 13
Acer Aspire 7535 Series Service Manual preview
Aspire 7535 Series
Brand: Acer Pages: 220
Acer Aspire 7551G Quick Manual preview
Aspire 7551G
Brand: Acer Pages: 9
Dell Inspiron 8500 Service Manual preview
Inspiron 8500
Brand: Dell Pages: 75
Packard Bell EasyNote TE User Manual preview
EasyNote TE
Brand: Packard Bell Pages: 120
Targa W730-K7 User Manual preview
W730-K7
Brand: Targa Pages: 43
ViewSonic ViewBook VS13550 User Manual preview
ViewBook VS13550
Brand: ViewSonic Pages: 23
Ozaki O!tool KeePad User Manual preview
O!tool KeePad
Brand: Ozaki Pages: 17
Viglen Futura S100 Hardware User Manual preview
Futura S100
Brand: Viglen Pages: 72
AmazonBasics B010QZD6I6 Instruction Manual preview
B010QZD6I6
Brand: AmazonBasics Pages: 45
HP Compaq Presario F500 - Notebook PC Maintenance And Service Manual preview
Presario F500 - Notebook PC
Brand: HP Compaq Pages: 120
Viglen Futura Durus User Manual preview
Futura Durus
Brand: Viglen Pages: 74
IBM THINKPAD T43 - Hardware Maintenance Manual preview
THINKPAD T43 -
Brand: IBM Pages: 232
Gigabyte W251U User Manual preview
W251U
Brand: Gigabyte Pages: 47

Brands by name

Popular brands

Load more brands