User’s Manual
1-7
Satellite C600/C640/C645/C600D/C640D/C645D, Satellite Pro C600/C640/C600D/C640D
Turning on the power
This section describes how to turn on the power - the
Power
indicator will
then indicate the status. Please refer to the
section in Chapter 6,
for more information.
1. Open the display panel.
2. Press and hold the computer’s power button for two or three seconds.
Figure 1-5 Turning on the power
Starting up for the first time
The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section
■
Volume cannot be adjusted during Windows Setup.
1. Power button
1
When it is displayed, be sure to read the
Software License Terms
carefully.
