manualshive.com logo in svg

Toshiba Satellite Pro A660 Series, User Manual

The Toshiba Satellite Pro A660 Series is a powerful and reliable laptop designed to meet your professional needs. Enhance your productivity with this feature-packed device. To make the most of its capabilities, we provide a comprehensive User Manual that you can download for free from our website.

Share
Download
background image

User’s Manual

8-12

Troubleshooting

USB floppy diskette drive

For further information, please refer to Chapter 3, 

Hardware, Utilities and 

Options

.

 

SD/SDHC/SDXC memory card, miniSD/microSD Card

For further information, please refer to Chapter 8, 

Optional devices

.

Problem

Procedure

Drive does not operate Check the connection between the computer and 

the drive to ensure that it is properly attached.

Some programs run 

correctly but others do 

not

The computer's software or hardware 

configuration may be causing a problem - ensure 

that these configurations match your 

requirements (refer to any relevant 

documentation, for example that supplied with 

any software in use, for further information).

You cannot access the 

external floppy diskette 

drive

Try another floppy diskette in the drive - if you are 

able to access this disk then it indicates the 

original disk and not the drive is probably causing 

the problem.
If you are still unable to resolve the problem, 

contact your reseller, dealer or service provider.

Problem

Procedure

SD/SDHC/SDXC 

memory card, 

miniSD/microSD Card 

error occurs

Remove the SD/SDHC/SDXC memory card, 

miniSD/microSD Card from the computer and 

then reinsert it in order to ensure it is firmly 

connected.
If the problem persists, then you should refer to 

the documentation supplied with your 

SD/SDHC/SDXC memory card, miniSD/microSD 

Card for further information.

You cannot write to an 

SD/SDHC/SDXC 

memory card

Remove the SD/SDHC/SDXC memory card from 

the computer and check to ensure that it is not 

write protected.

You cannot read a file

Check to ensure the required file is actually on 

the SD/SDHC/SDXC memory card, 

miniSD/microSD Card that is inserted into the 

computer.
If you are still unable to resolve the problem, 

contact your reseller, dealer or service provider.

Summary of Contents for Satellite Pro A660 Series









































































































































































































































































Reviews:

No comments

Related manuals for Satellite Pro A660 Series

Gateway NV52L Quick Start Manual preview
NV52L
Brand: Gateway Pages: 31
Gateway MX6111m Documentación Del Hardware preview
MX6111m
Brand: Gateway Pages: 64
Gateway MX6002m Guía De Referencia preview
MX6002m
Brand: Gateway Pages: 174
Gateway MT6704h Manual D'Installation preview
MT6704h
Brand: Gateway Pages: 2
Gateway MX6212j User Manual preview
MX6212j
Brand: Gateway Pages: 220
Gateway MT6228j Reference Manual preview
MT6228j
Brand: Gateway Pages: 146
Gateway MT6015j Reference Manual preview
MT6015j
Brand: Gateway Pages: 156
Gateway MT6221jb Reference Manual preview
MT6221jb
Brand: Gateway Pages: 134
Gateway ML6227v Príručka Pre Používateła preview
ML6227v
Brand: Gateway Pages: 114
Gateway ML6227q Felhasználói Kézikönyv preview
ML6227q
Brand: Gateway Pages: 114
Gateway ML6227z Referenční Příručka preview
ML6227z
Brand: Gateway Pages: 162
Gateway ML6227q Referencia Kézikönyv preview
ML6227q
Brand: Gateway Pages: 164
Gateway MT6704h Manual Du Matériel preview
MT6704h
Brand: Gateway Pages: 160
Gateway MD24 Reference Manual preview
MD24
Brand: Gateway Pages: 150
Gateway M675 Replacement Manual preview
M675
Brand: Gateway Pages: 8
Acer Aspire V5-552 Quick Manual preview
Aspire V5-552
Brand: Acer Pages: 9
Acer TravelMate 2200 Manuel D'Utilisation preview
TravelMate 2200
Brand: Acer Pages: 106
Acer Aspire E1-731 Quick Manual preview
Aspire E1-731
Brand: Acer Pages: 9

Brands by name

Popular brands

Load more brands