In use, the fingerprint authentication system uses the same username
and password as defined within the Windows operating system. If no
Windows password has been configured, you must do this before
starting the fingerprint registration process.
This sensor has the memory space for at least twenty fingerprint
patterns. You might be able to register more fingerprint patterns
depending on the sensor memory usage.
1.
Click
Fingerprint Utility
under
TOSHIBA
group in
All apps
.
2.
The
Enroll
screen is displayed. Enter the current account password
into the
Windows Password
field. If no Windows password has been
configured, you will be asked to configure the new logon password.
Then click
Next
.
3.
Click the non-enrolled finger you want to register and then click
Next
.
4.
The instructions for enrollment operation screen is displayed. Carefully
read them and then click
Next
.
5.
The scanning practice screen is displayed. You are able to practice
swiping (three times) your finger to ensure you use the correct
method. When you have finished practicing swiping your finger, click
Next
.
6.
Swipe four times with the same finger. If scanning of fingerprint
succeeds, "Enrollment succeeded! Do you want to save this
fingerprint?" message box appears. Click
OK
.
7.
The following message appears: "It’s strongly recommended you
enroll one more fingerprint.". Click
OK
and repeat Step 3, 4, 5 and 6
with another finger.
It is strongly recommended that you register 2 or more fingerprints.
You cannot enroll the same fingerprint more than once, even on a
different user account.
Delete the Fingerprint Data
Saved fingerprint data is stored in special non-volatile memory inside the
fingerprint sensor. Therefore, if you give the computer to someone else, or
dispose of it in any way, please uninstall the application or delete all the
logs created by the application.
Delete the fingerprint data for the currently logged in user
1.
In the
TOSHIBA Fingerprint Utility
main menu, select
Fingerprint
Enroll
.
User's Manual
4-13
