manualshive.com logo in svg

Toshiba Satellite Pro A50-C, User Manual

Share
Download
Toshiba Satellite Pro A50-C User Manual Download Page 50

Key Combination

Function

FN + F4

Switches the system to Hibernation Mode.

FN + F5

Changes the active display device.
To use a simultaneous mode, you must set the
resolution of the internal display panel to match the
resolution of the external display device.

FN + F6

Decreases the brightness of the display panel in
individual steps.

FN + F7

Increases the brightness of the display panel in
individual steps.

FN + F8

Turns the Airplane mode on or off.

FN + F9

Enables or disables the Touch Pad.

FN + ESC

Turns the sound on or off.

FN + 1

Reduces the icon size on the desktop or the font
sizes within one of the supported application
windows.

FN + 2

Enlarges the icon size on the desktop or the font
sizes within one of the supported application
windows.

FN + 3

Decreases the volume of the computer.

FN + 4

Increases the volume of the computer.

FN + 5

Switches between available cooling methods for
the current power plan.
This function is supported with some models.

FN + Space

Changes the display resolution.

FN + Z ( 

 )

Toggles the mode of the keyboard backlight
between 

Timer

, 

On

, and 

Off

.

To set up the brightness, click 

System Settings

under 

TOSHIBA

 group in 

All apps

. Click

Keyboard

 tab, and select a level under 

Keyboard 

Backlight Brightness Control

.

To set up the timer, launch the BIOS setup utility,
select 

Power Management -> Keyboard 

Backlight Control Mode

, and select 

TIMER

.

Adjust the timer under 

Backlight Lighting Time

.

This function is supported with some models.

User's Manual

4-3

Summary of Contents for Satellite Pro A50-C




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands