Toshiba Satellite P500 Maintenance Manual Download Page 168

Page: 168 / 288

Test Program for Field.

3.21.4 Test Stop Display

If an error occurs during a Subtest and YES is selected for Error Stop, the following message
displays:

[HALT OPERATION]

Test end

Continue

Retry

* Select 1, 2, or 3

The three selections have the following functions:

1:  Terminates the test program and exits to the subtest menu.
2:  Continues the test from the error.
3:  Restarts the test from the beginning.

Use the arrow keys to move the cursor to the desired option and press Enter.

3.21.5 How to enter data

Letters which must be entered are always shown in [ ]. Simultaneous entries are displayed
by a “+” mark. For example:

[a] [Enter]

Press the “a” key, then press the [Enter] key.

[Ctrl] + [c]

Press the [Ctrl] key and the “c” key simultaneously.

Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual

Summary of Contents for Satellite P500

































































































































































































































































































Search results

Summary of Contents for Satellite P500

Reviews:

Related manuals for Satellite P500

Brands by name

Popular brands

Toshiba Satellite P500, Maintenance Manual

Search results

Summary of Contents for Satellite P500

Reviews:

Related manuals for Satellite P500

Brands by name

Popular brands