Replacement Procedures
4.15 CPU
Removing the CPU heat sink
The following describes the procedure for removing the CPU heat sink (See Figure 4-27).
1.
Disconnect the
Heat sink cable
from the connector on the system board
2.
Remove the following
screws
securing the heat sink holder along 1 to 6.
•
M2.5
×
5.0
BIND
screw
x8
NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse
order of the number marked on the holder.
3.
Remove the
CPU
heat sink
.
Figure 4-25 Remove the CPU heat sink
Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08)
51
Summary of Contents for Satellite P300
