manualshive.com logo in svg

Toshiba Satellite L640, User Manual

The Toshiba Satellite L640 is a feature-packed laptop designed for optimal performance and user convenience. With its impressive specifications, this device provides a seamless computing experience. Looking for a user manual to fully utilize its capabilities? Download the comprehensive manual for free at manualshive.com, and unlock the true potential of your Toshiba Satellite L640.

Share
Download
background image

User’s Manual

6-5

Power and Power-Up Modes

Charging the batteries

When the power in the battery pack becomes low, the 

Battery

 indicator will 

flash amber to indicate that only a few minutes of battery power remain. If 

you continue to use the computer while the 

Battery

 indicator flashes, the 

computer will enable Hibernation Mode so that you do not lose any data, 

and automatically turn itself off.
You must recharge a battery pack when it becomes discharged.

Procedures

To recharge a battery pack while it is installed in the computer, connect the 

AC adaptor to the DC IN 19V jack and plug the other end into a working 

outlet - the 

Battery

 indicator will glow amber while the battery is being 

charged.

Time

Refer to User Information Guide about Charging time.

■

The battery pack and high capacity battery pack are lithium ion 

batteries, which can explode if not replaced, used, handled or disposed 

of properly. Dispose of the battery as required by local ordinances or 

regulations. Use only batteries recommended by TOSHIBA as 

replacements.

■

The computer's RTC battery is a Ni-MH battery and should be replaced 

only by your dealer or by a TOSHIBA service representative. The 

battery can explode if not properly replaced, used, handled or 

disposed. Dispose of the battery as required by local ordinances or 

regulations. 

■

Charge the battery pack only in an ambient temperature between 5 and 

35 degrees Celsius. Otherwise, the electrolyte solution might leak, 

battery pack performance might deteriorate and the battery life might 

be shortened.

■

Never install or remove the battery pack without first turning off the 

power and disconnecting the AC adaptor. Never remove the battery 

pack while the computer is in Sleep Mode. Data could be lost.

■

When the High Capacity Battery Pack is connected to the computer, do 

not hold on only to the High Capacity Battery Pack when lifting the 

computer up. The High Capacity Battery Pack may separate from the 

computer, causing it to fall and cause injuries.

Never remove the battery pack while the Wake-up on LAN function is 

enabled. Data will be lost. Before you remove a battery pack, disable the 

Wake-up on LAN function.

Use only the computer connected to an AC power source or optional 

TOSHIBA Battery charger to charge the battery pack. Never attempt to 

charge the battery pack with any other charger.

Summary of Contents for Satellite L640







































































































































































































Reviews:

No comments

Related manuals for Satellite L640

Acer Aspire 7740 Series Quick Manual preview
Aspire 7740 Series
Brand: Acer Pages: 12
Acer Aspire 7540 Series Quick Manual preview
Aspire 7540 Series
Brand: Acer Pages: 12
Acer ASPIRE 5745 Quick Manual preview
ASPIRE 5745
Brand: Acer Pages: 326
Acer Aspire ONE 722 User Manual preview
Aspire ONE 722
Brand: Acer Pages: 1810
Acer Aspire 9800 Read This First preview
Aspire 9800
Brand: Acer Pages: 3
YAKUMO NOTEBOOK Q7M ENTERTAINMENT XD Manual preview
NOTEBOOK Q7M ENTERTAINMENT XD
Brand: YAKUMO Pages: 41
NCS Cirrus LT Plus User Manual preview
Cirrus LT Plus
Brand: NCS Pages: 160
R-Go RGORIATBL Instruction Manual preview
RGORIATBL
Brand: R-Go Pages: 2
Medion Akoya P7815 Instruction Manual preview
Akoya P7815
Brand: Medion Pages: 90
Dell Inspiron 6000 Owner'S Manual preview
Inspiron 6000
Brand: Dell Pages: 126
Dell Inspiron 7300 2n1 Black Service Manual preview
Inspiron 7300 2n1 Black
Brand: Dell Pages: 66
DT Research LT350 Basic Operation Manual preview
LT350
Brand: DT Research Pages: 4
Medion MD 99595 Manual preview
MD 99595
Brand: Medion Pages: 235
Dell EMC Inspiron 5593 Setup And Specifications preview
Inspiron 5593
Brand: Dell EMC Pages: 22
Dell EMC Latitude 3300 Setup And Specifications Manual preview
Latitude 3300
Brand: Dell EMC Pages: 37
Gateway Solo 9100 Specifications preview
Solo 9100
Brand: Gateway Pages: 4
Gigabyte P27 User Manual preview
P27
Brand: Gigabyte Pages: 15
EarthWalk eBuddy 7.2 User Manual preview
eBuddy 7.2
Brand: EarthWalk Pages: 77

Brands by name

Popular brands

Load more brands