Toshiba Satellite L100-108 User Manual Download

Page: 49 / 186

User’s Manual

2-5

The Grand Tour

Underside

The following figure shows the underside of the computer. Make sure the

display is closed before turning over your computer.

The underside of the computer

Battery Pack

Battery Release Latch

Cooling

Vents

Battery

Lock

Memory

Module

Cover

HDD Cover

Wireless

LAN Cover

Battery Pack

The battery pack powers the computer when the

AC adaptor is not connected. For detailed

information on the battery pack, refer to

Chapter 6,

Power and Power-Up Modes

Battery Lock

Slide this lock to prepare the battery pack for

removal.

Battery Release

Latch

Slide and hold this latch to release the battery

pack for removal. For detailed information on

removing the battery pack, refer to Chapter 6,

Power and Power-Up Modes

Cooling Vents

Cooling vents help prevent the CPU from

overheating.

Memory Module

Cover

This cover protects the two memory module

sockets. One or two modules are preinstalled.

Refer to the

Memory expansion

section in

Chapter 8,

Optional Devices

Wireless LAN Cover

This cover protects the Wireless LAN bay and, if

installed, the Wireless LAN card.

Summary of Contents for Satellite L100-108



























































































































































































Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands

Toshiba Satellite L100-108, User Manual

Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands