Toshiba Satellite L100-108 User Manual Download

Page: 105 / 186

User’s Manual

6-1

Chapter 6

Power and Power-Up Modes

The computer’s power resources include the AC adaptor and internal

batteries. This chapter gives details on making the most effective use of

these resources including charging and changing batteries, tips for saving

battery power, and power up modes.

Power conditions

The computer’s operating capability and battery charge status are affected

by the power conditions: whether an AC adaptor is connected, whether a

battery is installed and what the charge level is for the battery.

Table Power conditions

Power on

Power off

(no operation)

Universal AC

adaptor

connected

Battery fully charged • Operates

• LED:

Battery

green

• LED:

Battery

green

Battery partially
charged or no
charge

• Operates
• Quick Charge
• LED:

Battery

orange

• Quick charge
• LED:

Battery

orange

No battery installed

• Operates
• No charge
• LED:

Battery

off

• No charge
• LED:

Battery

off

Summary of Contents for Satellite L100-108



























































































































































































Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands

Toshiba Satellite L100-108, User Manual

Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands