manualshive.com logo in svg

Toshiba Satellite L10, User Manual

The Toshiba Satellite L10 is a powerful laptop designed to meet your computing needs. To help you make the most of its features, a comprehensive User Manual is available for free download. Accessible on manualshive.com, this manual provides detailed instructions, ensuring a seamless and enjoyable user experience.

Share
Download
background image

56

Getting Started

Adding memory

5.375 x 8.375 ver 2.3

Adding memory

HINT: To purchase additional memory modules, see the 
accessories information packaged with your system or visit 

accessories.toshiba.com

.

Your Satellite

®

 L10/L15 computer comes with enough memory 

to run most of today’s popular applications. You may want to 
increase the computer’s memory if you use complex software 
or process large amounts of data. 

For more information on memory options, check the 
accessories information that came with your computer, or 
visit

accessories.toshiba.com

.

Installing a memory module

Additional memory modules can be installed in the memory 
module slots on the base of the computer. You will need a 
standard Phillips no.1 screwdriver for this procedure.

To avoid damaging the computer’s screws, use a standard 
Phillips no. 1 screwdriver that is in good condition. 

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.

Summary of Contents for Satellite L10


































































































































































































































Reviews:

No comments

Related manuals for Satellite L10

NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION Manual preview
VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION
Brand: NEC Pages: 4
Monster HUMA H5 V2.1 User Manual preview
HUMA H5 V2.1
Brand: Monster Pages: 74
TONGFANG AX201 User Manual preview
AX201
Brand: TONGFANG Pages: 44
BenQ Joybook S73V Series User Manual preview
Joybook S73V Series
Brand: BenQ Pages: 50
ThinkPad Yoga 11e 5th Gen User Manual preview
Yoga 11e 5th Gen
Brand: ThinkPad Pages: 144
Gigabyte GTX-1060 User Manual preview
GTX-1060
Brand: Gigabyte Pages: 125
Fujitsu LIFEBOOK T904 Ultrabook Operating Manual preview
LIFEBOOK T904 Ultrabook
Brand: Fujitsu Pages: 121
Fujitsu LIFEBOOK T935 Operating Manual preview
LIFEBOOK T935
Brand: Fujitsu Pages: 129
Fujitsu LIFEBOOK T904 Ultrabook User Manual preview
LIFEBOOK T904 Ultrabook
Brand: Fujitsu Pages: 196
Fujitsu LifeBook T902 Operating Manual preview
LifeBook T902
Brand: Fujitsu Pages: 131
Fujitsu LifeBook T902 User Manual preview
LifeBook T902
Brand: Fujitsu Pages: 392
Fujitsu LifeBook T901 Series User Manual preview
LifeBook T901 Series
Brand: Fujitsu Pages: 415
Fujitsu LIFEBOOK T935 Quick Start Manual preview
LIFEBOOK T935
Brand: Fujitsu Pages: 2
Epson ActionNote 800 Series User Manual preview
ActionNote 800 Series
Brand: Epson Pages: 17
Haier HR-C1162 User Manual preview
HR-C1162
Brand: Haier Pages: 18
Dell Latitude C840 System Information Manual preview
Latitude C840
Brand: Dell Pages: 322
LEXIBOOK MAGIC SPIDER-MAN Instruction Manual preview
MAGIC SPIDER-MAN
Brand: LEXIBOOK Pages: 36
Sony SVT13116FXS Specifications preview
SVT13116FXS
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands