Toshiba Satellite L10 User Manual Download Page 53

Page: 53 / 225

Getting Started

Using the computer for the first time

5.375 x 8.375 ver 2.3

TECHNICAL NOTE: The RTC battery does not charge while the
computer is turned off, even when AC power is attached.

The RTC battery charges when the computer is powered on.

Battery life and charge time may vary depending on the
applications, power management settings, and features used.

Using the computer for the first time

The computer is now ready for you to turn it on and begin
using it.

Opening the display panel

Slide the display latch to the right.

Lift the display panel.

Sample opening the display panel

To avoid damaging the display panel, do not force it beyond
the point where it moves easily, and never lift the computer by
the display panel.

NOTE

Display latch

Summary of Contents for Satellite L10


































































































































































































































Search results

Summary of Contents for Satellite L10

Reviews:

Related manuals for Satellite L10

Brands by name

Popular brands

Toshiba Satellite L10, User Manual

Search results

Summary of Contents for Satellite L10

Reviews:

Related manuals for Satellite L10

Brands by name

Popular brands