Toshiba Satellite C40-B Series User Manual Download

Page: 55 / 128

CD-R:

TAIYO YUDEN CO., Ltd.
MITSUBISHI KAGAKU MEDIA CO., LTD.

CD-RW: (Multi-Speed, High-Speed and Ultra-Speed)

MITSUBISHI KAGAKU MEDIA CO., LTD.

DVD-R:
DVD Specifications for Recordable Disc for General Version 2.0

TAIYO YUDEN Co.,Ltd. (for 8x and 16x speed media)
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)

DVD-R DL:

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)

DVD+R:

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)

DVD+R DL:

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x speed media)

DVD-RW:
DVD Specifications for Recordable Disc for Version 1.1 or version
1.2

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 6x speed media)

DVD+RW:

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)

DVD-RAM: (DVD Super Multi drive only)
DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or
Version 2.2

Panasonic Corporation (for 3x and 5x speed media)

Some types and formats of DVD-R DL and DVD+R DL discs might be
unreadable.
Disc created in DVD-R DL format4 (Layer Jump Recording) cannot be
read.

When writing or rewriting

Please observe the following points while you write or rewrite data to a
media:

Always copy data from the hard disk drive to the optical media. Do not
use the cut-and-paste function as the original data will be lost if there
is a write error.

User's Manual

4-10

Summary of Contents for Satellite C40-B Series

































































































































Search results

Summary of Contents for Satellite C40-B Series

Reviews:

Related manuals for Satellite C40-B Series

Brands by name

Popular brands

Toshiba Satellite C40-B Series, User Manual

Search results

Summary of Contents for Satellite C40-B Series

Reviews:

Related manuals for Satellite C40-B Series

Brands by name

Popular brands