Toshiba Satellite 2430, User Manual

Page: 176 / 222

AT Commands
Satellite 2430 Series H-4
Satellite 2430 Series
Version
1
Last Saved on 04/04/2003 13:35
ENGLISH using Euro_M.dot –– Printed on 04/04/2003 as IM_243EN
Hn Hook control
This command instructs the modem to go on-hook to
disconnect a call, or off-hook to make the phone line busy.
H0 Modem goes on-hook (default).
H1 Modem goes off-hook.
Result Codes:
OK
n=0,1
ERROR
Otherwise
In Request ID information
This command displays product information about the modem.
I0
Returns device information.
I1
Calculates ROM checksum and displays it on the DTE.
I2
Performs a ROM check and calculates and verifies the
checksum displaying
OK or ERROR .
I3 Same as I0 .
I4 Returns firmware version for data pump.
I9 Returns country code.
Result Codes:
OK
n=0,1,2,3,4,9
ERROR
Otherwise
Ln Monitor speaker volume
This command sets speaker volume to low, medium, or high.
L0 Low volume.
L1 Low volume. (Same as L0)
L2 Medium volume (default).
L3 High volume.
Result Codes:
OK
n=0,1,2,3
ERROR
Otherwise
Mn Monitor speaker mode
This command turns the speaker on or off.
M0 The speaker is off.
M1 The speaker is on until the modem detects the carrier
signal (default).
M2 The speaker is always on when modem is off-hook.
Result Codes:
OK
n=0,1,2
ERROR
Otherwise