13
Using the DVD-ROM or Multifunction drive
RG 5.375 x 8.375 ver 2.3.2
CAUTION: Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it. Instead, use a slim object such
as a straightened paper clip.
Inserting a disc
1
If the computer is turned on, press the eject button on the
DVD-ROM or Multifunction drive.
The disc tray partially opens.
CAUTION: To avoid damaging a disc or losing data, check that the disc activity
light is off before opening the disc tray.
2
Grasp the disc tray and pull it fully open.
3
Hold the disc by its edges and check that it is clean and
free of dust.
CAUTION: Handle discs carefully. Avoid touching the surface of the disc.
Grasp it by its center hole and edge. If you handle the disc incorrectly, you
could lose data.
4
Carefully place the disc in the empty tray with its label
facing up.
Inserting a disc
CAUTION: Be careful not to touch the drive’s lens (located underneath the
drive’s spindle) or the area around it. Doing so could cause the drive to
malfunction.
5
Gently press the center of the disc onto the spindle until it
locks into place.
Summary of Contents for Satellite 2430 Series
Page 46: ...RG 5 375 x 8 375 ver 2 3 2 ...
Page 47: ...RG 5 375 x 8 375 ver 2 3 2 ...
