Toshiba Satellite 2410 Series User Manual Download Page 97

Page: 97 / 257

Learning the Basics

Using Turn Off or Shut down

5.375 x 8.375 ver 2.4.0

The computer turns itself off.

If you are using the Windows

XP Pro operating system and

are a member of a domain, power off the computer as
follows:

Click the

Start

button, then

Shut down

The Shut Down window appears.

Sample Shut down computer window

Select

Shut down

from the drop-down list.

Click

The computer turns itself off.

Turning off or shutting down more quickly

In addition to the method described above, you can turn off or
shut down the computer by pressing the power button.

To do so, you must preset the mode.

Click

Start

Control Panel.

The Control Panel window appears.

Click

Performance and Maintenance

Double-click

the

Toshiba Power Saver

icon.

The TOSHIBA Power Saver Properties window appears.

Summary of Contents for Satellite 2410 Series


































































































































































































































































Search results

Summary of Contents for Satellite 2410 Series

Reviews:

Related manuals for Satellite 2410 Series

Brands by name

Popular brands

Toshiba Satellite 2410 Series, User Manual

Search results

Summary of Contents for Satellite 2410 Series

Reviews:

Related manuals for Satellite 2410 Series

Brands by name

Popular brands