background image

2

HL66 (E/F) Web 213:276

FCC Declaration of Conformity 
Compliance Statement 
(Part 15):

The 

Toshiba 26HL66, 32HL66, and 37HL66 Televisions

 

comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that 
may cause undesired operation.
The party responsible for compliance to these rules is: 
Toshiba America Consumer Products, L.L.C.  
82 Totowa Rd. Wayne, NJ 07470. 
Ph: 1-800-631-3811

Note: 

This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to Part 15 
of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and 
can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by 
removing and applying power to the equipment, the user is 
encouraged to try to correct the interference by one or more of 
the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the 

receiver.

• Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for 

help.

Caution: 

Changes or modifications to this equipment not 

expressly approved by Toshiba could void the user’s authority 
to operate this equipment.

Important notes about your 
LCD TV

The following symptoms are technical limitations of LCD 
Display technology and are not an indication of malfunction; 
therefore, Toshiba is not responsible for perceived issues 
resulting from these symptoms.

1) An afterimage (ghost) may appear on the screen if a fixed, non-

moving image is displayed for a long period of time. The 
afterimage is not permanent and will disappear in a short period of 
time.

2) The LCD panel contained in this TV is manufactured using an 

extremely high level of precision technology; however, there may 
be an occasional pixel (dot of light) that does not operate properly 
(does not light, remains constantly lit, etc.). This is a structural 
property of LCD technology, is not a sign of malfunction, and is 
not covered under your warranty. Such pixels are not visible when 
the picture is viewed from a normal viewing distance.

Note: 

Interactive video games that involve shooting a “gun” 

type of joystick at an on-screen target may not work with this 
TV.

Trademark Information

• WOW, SRS and 

l

 symbol are trademarks of SRS Labs, Inc.

WOW technology is incorporated under license from SRS Labs, Inc.

• Manufactured under license from Dolby Laboratories. Dolby and the 

double-D symbol are registered trademarks of Dolby Laboratories.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are 

trademarks or registered trademarks of HDMI Licensing LLC.

2632HL66_EN.book  Page 2  Tuesday, July 18, 2006  3:47 PM

Summary of Contents for REGZA 32HL66





















































Reviews: