I
NFRARED
R
EMOTE
C
ONTROLLER
– 11 –
GB
C
OOLING
O
PERATION
1.
Select the operating mode.
Press the MODE button and set the display to
COOL.
2.
Select the air flow speed.
Press the FAN switch and set the display to the
desired speed at which the cool air will be blown
out. (AUTO, LOW, MED or HIGH.)
l
At the AUTO position, the speed is changed
automatically with the room temperature.
3.
Select the desired temperature.
Press the
t s
switches to set the temperature
as desired.
4.
Press the ON/OFF button.
l
The ON/OFF lamp (red) will now light and
operation will begin after about a minute.
5. CHR/KHR/PGR only
To drive the outlet louvers automatically, press
this button.
6.
Press the ON/OFF button again.
l
The lamp goes off and operation will stop.
l
If the operation is stopped and then the ON/
OFF button is pressed immediately, the air
conditioner will not operate for about 3
minutes, to protect the unit.
After about 3 minutes, operation will be
resarted automatically.
l
For details on how to use the timer, see pages
12 & 13.
