background image

2

Super Digital Inverter

EN

EN

Thank you for purchasing this Toshiba air conditioner.
Please read carefully through these instructions that contain important information which complies with the “Machinery” 
Directive (Directive 2006/42/EC), and ensure that you understand them.
Some of the details provided in these instructions differ from the Installation Manual supplied with your product, and the 
instructions provided here take precedence.
After reading these instructions, be sure to keep them in a safe place together with the Owner’s Manual and Installation Manual 
supplied with your product.

Generic Denomination: Air Conditioner

Definition of Qualified Installer or Qualified Service Person

The air conditioner must be installed, maintained, repaired and removed by a qualified installer or qualified service person. 
When any of these jobs is to be done, ask a qualified installer or qualified service person to do them for you.
A qualified installer or qualified service person is an agent who has the qualifications and knowledge described in the table 
below.

Agent

Qualifications and knowledge which the agent must have

Qualified 
installer

• The qualified installer is a person who installs, maintains, relocates and removes the air conditioners 

made by Toshiba Carrier Corporation. He or she has been trained to install, maintain, relocate and 
remove the air conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has been 
instructed in such operations by an individual or individuals who have been trained and is thus 
thoroughly acquainted with the knowledge related to these operations.

• The qualified installer who is allowed to do the electrical work involved in installation, relocation and 

removal has the qualifications pertaining to this electrical work as stipulated by the local laws and 
regulations, and he or she is a person who has been trained in matters relating to electrical work on the 
air conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has been instructed in 
such matters by an individual or individuals who have been trained and is thus thoroughly acquainted 
with the knowledge related to this work.

• The qualified installer who is allowed to do the refrigerant handling and piping work involved in 

installation, relocation and removal has the qualifications pertaining to this refrigerant handling and 
piping work as stipulated by the local laws and regulations, and he or she is a person who has been 
trained in matters relating to refrigerant handling and piping work on the air conditioners made by 
Toshiba Carrier Corporation or, alternatively, he or she has been instructed in such matters by an 
individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge 
related to this work.

• The qualified installer who is allowed to work at heights has been trained in matters relating to working 

at heights with the air conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has 
been instructed in such matters by an individual or individuals who have been trained and is thus 
thoroughly acquainted with the knowledge related to this work.

Qualified 
service person

• The qualified service person is a person who installs, repairs, maintains, relocates and removes the air 

conditioners made by Toshiba Carrier Corporation. He or she has been trained to install, repair, 
maintain, relocate and remove the air conditioners made by Toshiba Carrier Corporation or, 
alternatively, he or she has been instructed in such operations by an individual or individuals who have 
been trained and is thus thoroughly acquainted with the knowledge related to these operations.

• The qualified service person who is allowed to do the electrical work involved in installation, repair, 

relocation and removal has the qualifications pertaining to this electrical work as stipulated by the local 
laws and regulations, and he or she is a person who has been trained in matters relating to electrical 
work on the air conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has been 
instructed in such matters by an individual or individuals who have been trained and is thus thoroughly 
acquainted with the knowledge related to this work.

• The qualified service person who is allowed to do the refrigerant handling and piping work involved in 

installation, repair, relocation and removal has the qualifications pertaining to this refrigerant handling 
and piping work as stipulated by the local laws and regulations, and he or she is a person who has been 
trained in matters relating to refrigerant handling and piping work on the air conditioners made by 
Toshiba Carrier Corporation or, alternatively, he or she has been instructed in such matters by an 
individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge 
related to this work.

• The qualified service person who is allowed to work at heights has been trained in matters relating to 

working at heights with the air conditioners made by Toshiba Carrier Corporation or, alternatively, he or 
she has been instructed in such matters by an individual or individuals who have been trained and is 
thus thoroughly acquainted with the knowledge related to this work.

2-EN

Summary of Contents for RAV-SP1104AT8-E




































Reviews: