background image

– 10 –

Compact 4-way Type

Owner’s Manual

EN

Compact 4-way Type

Owner’s Manual

3

Push TIME 

 

 buttons, to adjust the power saving mode setting.

• Each push of the button changes the power level by 1 % within the range from 100 % to 50 %.
• The factory default is 75 %.

4

Push  

button.

5

Push 

 button to complete the setting.

NOTE

• When other electric appliances are used at the same time, to avoid triggering the circuit breaker, power saving mode is 

recommended. Of course power saving mode can be used to save energy as well.

• Power saving mode consumes less energy, but may not heat / cool the room as much as normal mode. (The maximum 

current is limited to approximately 75 % (factory default) of the normal mode.)

• To adjust the power-save settings, see “To configure the power saving mode settings” in Power Saving Mode.
• Even when operation start / stop, operation mode change, or power reset is performed during the power saving mode, the 

power saving mode is retained until the next operation.

Setting of power level in 
power saving mode

8

Self Clean Mode

This function is provided to dry the inside of the indoor unit by the FAN operation after running the cooling 
/ dry / AUTO (cooling) mode to keep the indoor unit clean.

• The self clean time varies with the cooling / dry

 

/

 

Auto (cooling) operation time as follows.

 

• “

” is displayed on the remote controller during self clean operation.

To stop self clean forcibly, push 

 button twice in succession.

CAUTION

• The fan continues to run even after

 

 

button is pushed to stop operation in some modes. 

 

This is normal because the self clean mode is in progress.

• The louvers open slightly and are directed horizontally during self clean, and they close when the self clean is 

completed.

• The operation lamp (LED) does not light during the self clean mode (function).
• The self clean mode (function) cannot clean the room or remove the already existing mold and dust inside the indoor 

unit.

• To cancel the self clean function, consult the dealer.

Cooling / dry / Auto (cooling) operation time

self clean time

Less than 10 minutes

No self clean operation

10 minutes to less than 1 hour

1 hour

More than 1 hour

2 hours

19-EN

20-EN

+00EH99937799_01EN.book  Page 10  Thursday, March 31, 2011  10:00 PM

Summary of Contents for RAV-SM404MUT-E

















Reviews: