Installation Manual
‒
16
‒
16-EN
EN
FR
ES
5
CUTTING A HOLE AND MOUNTING INSTALLATION
PLATE
Cutting a hole
In case of installing the refrigerant pipes from the
rear:
1. Decide the hole position for piping at
7.1
″
(180 mm) from the arrow mark
(
Ö
) on the installation plate and drill a
hole at a slight downward slant toward
outdoor side.
Pipe hole; dia.2.6
″
(65 mm):
SM122-SM182 type
Pipe hole; dia.3.1
″
(80 mm): SM242 type
The centre of the pipe hole
is above the arrow.
0.9
″
(23 mm)
dia. 2.6
″
(65 mm)
SM122-SM182 type
dia. 3.1
″
(80 mm)
SM242 type
7.1
″
(180 mm)
Pipe hole
NOTE
• When drilling a wall that contains a metal lath,
wire lath or metal plate, be sure to use a pipe
hole brim ring sold separately.
Mounting the installation plate
Pipe hole
Indoor unit
Hook
Hook
Thread
Weight
Pipe hole
dia. 2.6
″
(65 mm)
SM122-SM182
dia. 3.1
″
(80 mm)
SM242
Hook
Installation
plate
Mounting
screw
Anchor bolt holes
6.7
″
(170 mm)
6.7
″
(170 mm)
5.2
″
(132 mm)
0.9
″
(23 mm)
dia.2.6
″
(65 mm)
1.6
″
(40 mm)
2.0
″
(50 mm)
Be sure that the installation plate is
fi
x to the wall
with screws to make the indoor unit
fi
t to the wall.
3.3
″
(85 mm)
6
′
7
″
(2 m) or more
from
fl
oor
When the installation plate is
directly mounted on the wall
1. Securely
fi
t the installation plate onto the
wall by screwing it in the upper and lower
parts to hook up the indoor unit.
2. To mount the installation plate on a
concrete wall with anchor bolts, utilize
the anchor bolt holes as illustrated in the
above
fi
gure.
3. Install the installation plate horizontally in
the wall.
CAUTION
When installing the installation plate with a
mounting screw, do not use the anchor bolt
hole. Otherwise the unit may fall down and
result in personal injury and property damage.
Clip anchor
(local parts)
Mounting screw
Ø5/32
″
(4 mm) × 1.0
″
(25 mm)
Anchor bolt
Projection
0.6
″
(15 mm) or less
NO
GOOD
NO
GOOD
OK
0.2
″
(5 mm) dia. hole
CAUTION
Failure to firmly install the unit may result in
personal injury and property damage if the unit
falls.
• In case of block, brick, concrete or similar type
walls, make 0.2
″
(5 mm) dia. holes in the wall.
• Insert clip anchors for appropriate mounting
screws.
NOTE
• Secure four corners and lower parts of the
installation plate with 6 mounting screws to
install it.
01_1121250414-EN.indd 16
01_1121250414-EN.indd 16
14/1/2565 BE 16:50
14/1/2565 BE 16:50
