Installation Manual
‒
33
‒
33-EN
Remote controller switch
monitoring function
This function is available to call the service
monitor mode from the remote controller during a
test run to acquire temperatures of sensors of the
remote controller, indoor unit, and outdoor unit.
Monitor function
Code
00
Data
0024
Return
1
Push the [
3
] / [
4
] button to select
“4. Monitor function” on the “Field setting
menu” screen, then push the
“
Set
Set” [ F2] button.
Æ
Push the [
3
] / [
4
] button to select
the code to check data.
2
Refer to the Installation Manual supplied
with the indoor unit or outdoor unit or
service manual for details about the check
code and data.
3
Push the [
CANCEL] button to return to
the “Field setting menu” screen.
Indoor unit data
CODE
No.
Data name
01
Room temperature (remote controller)
02
Indoor unit intake air temperature (TA)
03
Indoor unit heat exchanger (coil) temperature
(TCJ)
04
Indoor unit heat exchanger (coil) temperature
(TC)
F3
Indoor unit fan cumulative operating hours
(x1h)
Outdoor unit data
CODE
No.
Data name
60
Outdoor unit heat exchanger (coil)
temperature (TE)
61
Outside air temperature (TO)
62
Compressor discharge temperature (TD)
63
Compressor suction temperature (TS)
64
—
65
Heatsink temperature (THS)
6A
Operating current (x1/10)
F1
Compressor cumulative operating hours
(x100h)
Adjustment of air direction
1. Using the remote controller switch, change the
up/down air direction by moving the horizontal
louver.
2. Adjust the right/left air direction by bending the
vertical grille inside of the air outlet port with
hands.
REQUIREMENT
Do not touch the horizontal louver directly with
hands; otherwise a trouble may be caused.
For handling of the horizontal louver, refer to
“Owner’s Manual” attached to the outdoor unit.
Return
Wind direction
Swing ON
Louver
1
Push the [
3
] / [
4
] button to select
“1. Wind direction” on the menu screen,
then push the “
Set
Set” [ F2]
button.
2
Push the [
3
] / [
4
] button to select
the wind direction.
(1)
(2)
(3)
(4)
(5)
Operation mode
Available directions
Heat, Fan,
Auto (heating)
(1) (2) (3) (4) (5)
Cool, Dry,
Auto (cooling)
(1) (2) (3)
3
Push the [
CANCEL] button to return.
Æ
The screen returns to the menu screen.
01_1121250414-EN.indd 33
01_1121250414-EN.indd 33
14/1/2565 BE 16:50
14/1/2565 BE 16:50
