background image

10 

AUTO RESTART OPERATION

This air conditioner is equipped with an Automatic 
restarting facility which allows the air conditioner 
to resume the set operating conditions in the event 
of a supply power shutdown without the use of the 
remote controller. 
The operation will resume without warning three 
minutes after the power is restored.

NOTE

The Auto Restart Operation is not set to work on 
shipment from the factory, and so it is necessary to 
set it to function as required.

 

How to set the auto restart

To set the auto restart function, proceed as follows: 
The power supply to the unit must be on the 
function will not set if the power is off. 
To enable the auto restart function, push the 
TEMPORARY button continually for more than 3 
seconds, less than 10 seconds. 
The air conditioner will acknowledge the setting 
and beep 2 times (

fi

 rst long, second short sound) 

and 

 lamp is 

fl

 ashing 5 seconds (5 Hz). 

The system will now restart automatically. 
The above auto restart settings can be carried out:

 

How to cancel the auto restart

To cancel the auto restart operation, proceed as 
follows: 
Repeat the setting procedure: the air conditioner 
will acknowledge the instruction and beep 2 times 
(

fi

 rst long, second short sound). 

The air conditioner will now require to be manually 
restarted with the remote controller after the main 
supply is turned off. 
Cancellation is carried out:

Owner’s Manual

- 28 -

28-EN

OM_1122650210.indd   28

OM_1122650210.indd   28

2/7/21   10:59

2/7/21   10:59

Summary of Contents for RAV-GM301KRTP-A













































Reviews: