No.
Part name
Procedures
Remarks
7
Compressor
1) Perform work of item 1 of
1
and
2
,
3
,
4
,
5
.
2) Extract refrigerant gas.
3) Remove the partition board.
(ST2TØ4 × 10L 3 pcs.)
4) Remove the sound-insulation material.
5) Remove terminal cover of the compressor, and
disconnect lead wire of the compressor from
the terminal.
6) Remove pipe connected to the compressor with
a burner.
7) Remove the fixing screw of the bottom plate
and heat exchanger. (ST2TØ4 × 10L 1 pc.)
8) Remove the fixing screw of the bottom plate
and valve fixing plate.
(ST2TØ4 × 10L 1 pc.)
9) Pull upward the refrigeration cycle.
8
Reactor
1) Perform work of item 1 of
2
and
3
.
2) Remove screws fixing the reactors
(ST2TØ4 × 10L 2 pcs.)
Compressor
Reactor
10) Remove NUT (3 pcs. fixing the compressor to
the bottom plate.
- 126 -
