– 26 –
FILE NO. SVM-06027
7-10. Self-Cleaning function
Self-Cleaning function is designed to reduce humidity that causes mold to form inside the air conditioning unit.
This advanced, efficient system reduces moisture in the coil. When air conditioner is turned off, the internal fan
activates and dries the moisture in the coil for 20 minutes, then it turns off automatically.
Operation display
ON
OFF
OFF
FCU fan
ON
ON
OFF
rpm is depend on presetting. rpm is SL speed.
FCU louver
OPEN
CLOSE
CLOSE
Timer display
ON or OFF
ON
ON or OFF
depend on presetting of timer function.
depend on presetting of timer function.
Compressor
ON or OFF
OFF
OFF
depend on presetting per room temperature.
CDU fan
ON or OFF
OFF
OFF
depend on presetting per room temperature.
8
-
8
Cool mode or dry mode
operation more than 10 mins.
Self-Cleaning mode
operate 20 mins.
Automatically turn-off.
Operation time
Turn off by remote controller or
timer-off function.
•
The Self-Cleaning function is set as default at ex-factory.
•
Self-Cleaning operation can stop manually by press [ ] button of the remote control two more time.
7-10-2. How to set Self-Cleaning function.
To set the Self-Cleaning function, proceed as follows.
•
Press [RESET] button one time or use remote
control to turn on air conditioner. The OPERATION
display will show in orange color (When AUTO-
RESET is ON) or green color (When AUTO-
RESTART is OFF).
•
Hold down the [RESET] button for more than
20 seconds. (The air conditioner will stop suddenly
when the [RESET] button is pressed but keep
holding it continue. Then will beep 3 times is the first
3 seconds but it is not related to Self-Cleaning
function)
•
After holding about 20 seconds, the air conditioner
will beep 5 times and OPERATION display blinks
5 times.
•
The Self-Cleaning function had been set.
Remarks
•
Per setting of Self-Cleaning function above, AUTO-
RESTART function had been cancelled. To set
AUTO-RESTART again, please follow item 7-8-1.
7-10-1. How to cancel Self-Cleaning function
To cancel the Self-Cleaning function, proceed as
follows:
•
Press [RESET] button one time or use remote
control to turn on air conditioner. The OPERATION
display will show in orange color (When AUTO-
RESTART is ON) or green color (When AUTO-
RESTART is OFF).
•
Hold down the [RESET] button for more than
20 seconds. (The air conditioner will stop suddenly
when the [RESET] button is pressed but keep
holding it continue. Then will beep 3 times in the first
3 seconds but it is not related to Self-Cleaning
function)
•
After holding about 20 seconds, the air conditioner
will beep 5 times without any blinking of display.
•
The Self-Cleaning Operation had been cancelled.
Remarks
•
Per setting of Self-Cleaning function above, AUTO-
RESTART function had been cancelled. To set
AUTO-RESTART again, please follow item 7-8-1.
R E S E T
