– 47 –
3. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press MODE : Select DRY.
2. Press TEMP : Set the desired temperature.
4. ECO OPERATION
To automatically control room to save energy (except in DRY mode)
Press ECO : Start and stop the operation.
Note:
Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase). For heating operation the
set temperature will decrease.
5. TEMPORARY OPERATION
In case of the misplaced or discharged remote control
•
Pressing the RESET button, the unit can start or stop
without using the remote control.
•
Operation mode is set on AUTOMATIC
operation, preset temperature is 24°C
and fan operation is automatic speed.
6. TIMER OPERATION
FILE NO. SVM-08011
Setting the ON Timer
Setting the OFF Timer
Press TIMER ON : Set the desired ON timer.
1
2
3
Press TIMER OFF : Set the desired ON timer.
Press TIMER SET : Set the timer.
Press TIMER CLR : Cancel the timer.
Press TIMER SET : Set the timer.
Press TIMER CLR : Cancel the timer.
Note:
· Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
7. AUTO RESTART OPERATION
To automatically restart the conditioner after the power failure (Power of the unit
must be on.)
1. Press and hold the RESET button on the indoor unit for 3 seconds to set the
operation. (3 beep sound and OPERATION lamp blink 5 time/sec for 5 secpmds)
•
Do not operate ON timer and OFF timer.
2. Press and hold the RESET button on the indoor unit for 3 seconds to cancel the
Setting
operation. (3 beep sound but OPERATION lamp does not blink)
