Toshiba RAD-Y200H, Instruction Manual

Page: 35 / 36

Symptoms and remedies
Is the power cord properly inserted?
Plug the power cord fully into
the power socket.
Is the Water Tank full?
(Water Tank is full of water or it is not properly inserted)
Empty the Water Tank and insert it
back into the Unit.
Is the ambient temperature
too low or too high?
It is recommended to operate the Dehumidifier
between an ambient temperature range of 5-32°C.
Is the temperature or humidity of the
room too low? Low humidity reduces dehumidifying
effectiveness.
Is the Air Outlet or Air Intake clogged?
Remove the items blocking the Air Outlet
and Air Intake.
No air comes out
Is the Air Intake blocked?
Clear the items blocking the Air Intake.
Is the Unit placed on a slope or uneven
surface that causes it to tilt or wobble? Place the Unit on a stable and
leveled surface.
Is the Air Intake blocked? Clear the items blocking the Air Intake.
The sound of flowing water
This is caused by the flow of refrigerant
inside the Unit.
The drain hose is loosely attached Securely insert the drain hose.
The Drainage system is blocked Unclog the hose.
Frosted up
This is not a malfunction that defrosting operation
could be activated by the Drying Inside Operation.
2. Error message code description
1. The remedies that could resolve the symptoms listed below.
FL Water Tank Full alarm
E1 Coil Sensor failure
E2 Ambient Temperature Sensor failure
P1 Defrosting Operation activated
CL Drying Inside Operation activated
LC Child Lock Mode activated
The Unit does not
operate
Poor
dehumidification
results
The Unit makes
abnormaloperating
noises
Water leakage
Troubleshooting
Please check the following items of the Dehumidifier before calling for service.
Symptom Remedy Possible Cause
Low ambient temperature causing the
Unit to activate the defrost operation.
Code Description
17