Toshiba Qosmio F40 Maintenance Manual Download

Page: 76 / 278

3.2 Quick Start

3 Diagnostic Programs

User can press any key to exit the program.

3.2.8 DMI

Write

In addition to reading the DMI information,

DMI Write

also permits attributes editing

and updating: Manufacture, Product Name, Version, Serial Number, and OEM Part
Number, etc. The following screen will be displayed:

In this screen, there are two lines which attribute could be edited and updated. The 1

line (the font in yellow with blue background) shows the attribute’s value that is read
from the current system and the 2

line (the font in red with turquoise background)

shows the same value as that in the 1

line before user’s editing. User can modify the

attribute’s value in the 2

line and press

Enter

to confirm the current edition and

continue editing the next attribute.

QosmioF40/F45，dynabook Qosmio F40

Maintenance Manual

Summary of Contents for Qosmio F40























































































































































































































































































Search results

Summary of Contents for Qosmio F40

Reviews:

Related manuals for Qosmio F40

Brands by name

Popular brands

Toshiba Qosmio F40, Maintenance Manual

Search results

Summary of Contents for Qosmio F40

Reviews:

Related manuals for Qosmio F40

Brands by name

Popular brands