background image

 

 

E6581680

 

 Limitation of use 

 

Safety precaution

 

  Never use this unit with any inverter other than TOSVERT series inverters. Doing so may cause an accident. 

 

 

 Handling in general 

 

Warning

 

 

 

Never 

Disassemble 

 

Never disassemble, modify or repair the product. 
Disassembling the product may cause electric shocks, fire or injuries. 
For repairs, call your sales/repair agency. 

 

 

Prohibited 

 

Do not put or insert foreign objects such as waste cable, bars, or wires into the product.   
It may lead to electric shocks or fire. 

 

Do not splash water over the product, and do not wipe the body with a wet cloth. 
It may lead to electric shocks or fire. 

 

 

Mandatory 

action 

 

Turn off input power before wiring. 
Wait at least 15 minutes and check to make sure that the charge lamp (on the inverter unit) is no 
longer lit. 

 

Turn off the power immediately in case of any abnormalities such as smoke, smell or abnormal 
noise. 
Neglect of these conditions may lead to fire. 
For repairs, call your sales/repair agency. 

 

 Transportation and usage

 

 

Warning

 

 

 

Prohibited 

 

Do not install or operate the inverter if it is damaged or any part of it is missing.   
Operating a defective inverter may lead to electric shocks or fire. 
For repairs, call your sales/repair agency. 

 

Do not put any flammable material near the product. 
It may catch fire due to the product sparking in the case of a malfunction. 

 

Do not connect a LAN cable or telephone modular cable to Parameter writer.   
Doing so may cause a failure or accident.

 

 

  E

lectrical construction work must be done by a qualified expert. 

 

Connection of input power by someone who does not have expert knowledge may result in fire 
or electric shock. 

Mandatory 

action 

 

Operate under the environmental conditions prescribed in the instruction manual.   
Operations under any other conditions may result in malfunction.   

 

An emergency stop inverter must be installed that fits with system specifications 
  (e.g. shut off input power then engage mechanical brake).   
Operation cannot be stopped immediately by the inverter alone, thus risking an accident or 
injury. 

 

Use the attached cable for connecting this optional unit. 
The use of any other option may result in an accident.

 

Caution

 

 

 

Do not use the product in any place subject to vibrations or it may fall.       

 

This may lead to the product falling and causing injury. 

 

Do not use 

nickel-cadmium rechargeable battery or manganese battery

Prohibited 

This may lead to 

liquid spill and fire

 

Do not use different type of battery together, or new battery and reuse one together 

This may lead to 

liquid spill and fire

 

 

Summary of Contents for PWU003Z


























Reviews: