Toshiba PORTEGE R500 Series User Manual Download Page 117

Page: 117 / 202

User’s Manual

6-3

PORTÉGÉ R500

DC IN indicator

Check the

DC IN

indicator to determine the power status with the AC

adaptor connected - the following indicator conditions should be noted:

Power indicator

Check the

Power

indicator to determine the power status of the computer -

the following indicator conditions should be noted:

Blue

Indicates the AC adaptor is connected and is

correctly supplying power to the computer.

Flashing orange

Indicates a problem with the power supply. You

should initially try plugging the AC adaptor into

another power outlet - if it still does not operate

properly, you should contact your reseller or dealer.

No light

Under any other conditions, the indicator does not

light.

Blue

Indicates power is being supplied to the computer

and the computer is turned on.

Blinking orange

Indicates that the computer is in Sleep Mode and

that there is sufficient power available (AC adaptor

or battery) to maintain this condition. In Sleep

Mode, this indicator will turn on for one second and

off for two seconds.

No light

Under any other conditions, the indicator does not

light.

Summary of Contents for PORTEGE R500 Series











































































































































































































Search results

Summary of Contents for PORTEGE R500 Series

Reviews:

Brands by name

Popular brands

Toshiba PORTEGE R500 Series, User Manual

Search results

Summary of Contents for PORTEGE R500 Series

Reviews:

Brands by name

Popular brands