manualshive.com logo in svg

Toshiba Portege M405 Series, User Manual

The Toshiba Portege M405 Series User Manual is an essential guide for owners of this sleek and powerful laptop. Obtain the manual for free through our website, allowing you to easily download and access the detailed instructions and information you need for optimal use of your device.

Share
Download
background image

7

5.375 x 8.375 ver 2.3

Wireless Interoperability

The TOSHIBA Wireless LAN Mini PCI Card products are designed to be 
interoperable with any wireless LAN product that is based on Direct Sequence 
Spread Spectrum (DSSS) radio technology, and is compliant to: 

❖

The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined 
and approved by the Institute of Electrical and Electronics Engineers.

❖

The Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi Alliance. 
The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.

Bluetooth

®

 and Wireless LAN devices operate within the same radio 

frequency range and may interfere with one another. If you use 

Bluetooth 

and 

Wireless LAN devices simultaneously, you may occasionally experience a 
less than optimal network performance or even lose your network 
connection.

If you should experience any such problem, immediately turn off your 

Bluetooth

 or Wireless LAN device.

Please contact Toshiba computer product support on Web site 
http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or 
pcsupport.toshiba.com in the United States for more information.

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 GHz to 
5.25 GHz frequency range. FCC requires this product to be used indoors for 
frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful 
interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35 
GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause 
interference with and/or damage this device.

Wireless LAN and Your Health

Wireless LAN products, like other radio devices, emit radio frequency 
electromagnetic energy. The level of energy emitted by Wireless LAN devices 
however is far much less than the electromagnetic energy emitted by wireless 
devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found in radio 
frequency safety standards and recommendations, TOSHIBA believes Wireless 
LAN is safe for use by consumers. These standards and recommendations reflect 
the consensus of the scientific community and result from deliberations of panels 
and committees of scientists who continually review and interpret the extensive 
research literature.

Summary of Contents for Portege M405 Series


















































































































































































































































Reviews:

No comments

Related manuals for Portege M405 Series

Gateway 3100 Series Specifications preview
3100 Series
Brand: Gateway Pages: 7
Panasonic The Toughbook 31 Features preview
The Toughbook 31
Brand: Panasonic Pages: 2
Clevo E4120 User Manual preview
E4120
Brand: Clevo Pages: 232
XMG PB50EF Series Service Manual preview
PB50EF Series
Brand: XMG Pages: 38
Acer Ferrari 4000 Guía Del Usuario preview
Ferrari 4000
Brand: Acer Pages: 64
Acer Ferrari 4000 Manual Do Utilizador preview
Ferrari 4000
Brand: Acer Pages: 64
Acer TravelMate 620 Series User Manual preview
TravelMate 620 Series
Brand: Acer Pages: 92
Acer TravelMate 630 series Guía Del Usuario preview
TravelMate 630 series
Brand: Acer Pages: 100
Acer TravelMate 8481 Manual preview
TravelMate 8481
Brand: Acer Pages: 76
Asus E17919 Manual preview
E17919
Brand: Asus Pages: 102
NEC VERSA 2205C Manual preview
VERSA 2205C
Brand: NEC Pages: 89
NEC Packard Bell EasyNote M5 Disassembly Manual preview
Packard Bell EasyNote M5
Brand: NEC Pages: 28
NEC TCM380 Quick Start Manual preview
TCM380
Brand: NEC Pages: 47
NEC VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION Manual preview
VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION
Brand: NEC Pages: 4
NEC ShieldPRO FC-N21S Brochure & Specs preview
ShieldPRO FC-N21S
Brand: NEC Pages: 16
NEC ShieldPRO Quick Start Manual preview
ShieldPRO
Brand: NEC Pages: 20
NEC PB EasyNote M5 Disassembly Manual preview
PB EasyNote M5
Brand: NEC Pages: 30
NEC VERSA 2400 - SERVICE Service Manual preview
VERSA 2400 - SERVICE
Brand: NEC Pages: 104

Brands by name

Popular brands

Load more brands