Toshiba Portege 2000, Maintenance Manual

Page: 59 / 270

2.4 Main board Troubleshooting 2 Troubleshooting
Portege 2000 Maintenance Manual (960-333) 2-23
Table 2-3 D port status (4/6)
D port status Inspection items details
F108h Initializing the data in CMOS Running a task waiting for the end of INIT_PCI
Initializing PnP Initializing the data in CMOS (2)
Setting up the setup
t
Initializing PnP
Setting up the setup parameters
Waiting for the end of multiple box states check
Setting up the hardware parameters based on resources
F109h Serial interrupt control Serial interrupt control
Initializing PnP hardwares Initializing PC Card Slots
Configuration Initializing SIO
Initializing FIR
Creating a work area for auto configuration
Configuration
Storing the results of VGA configuration
F10Ah Initializing drives Starting an HDD initialization sequence
Starting an FDD initialization sequence
Initializing a USB Host Controller, and recognizing a device
Generating output codes
F10Bh Checking the first 64KB of Checking the first 64KB of memory
F10Ch Initializing interrupt vectors Initializing interrupt vectors
F10Dh Initializing a NDP Initializing a NDP
F10Eh Setting up system Storing CMOS error information in SMRAM
Initializing timer
Initializing a buffer for power saving
Initializing an EC, and reading battery information
Updating system BIOS (model name, and EDID of the LCD)
F10Fh Initializing the display Initializing VGA BIOS
F110h Displaying a logo Displaying a logo on the screen
F111h Checking system memory Checking system memory
F112h Checking an expansion Checking an expansion memory
F113h Initializing system memory Initializing system memory
F114h Initializing an expansion Initializing an expansion memory
F115h Checking DMA pages Checking DMA pages