Toshiba PDR-3310, Instruction Manual

Page: 23 / 62

43 42
White Balance
An image’s color will change depending on the kind of light source
present. Select the white balance as follows to compensate for different
light sources.
[ AUTO ] (default) In this mode, the white balance is set automatically by
the camera.
[ ] Bright sun
[ ] Incandescent light bulbs (Tungsten)
[ ] Cloudy weather
[ ] Fluorescent light
[ ] Use this setting when you wish to set the white balance
manually. Instructions for setting the white balance can
be found on page 44.
* The default setting is the Bright Sun.
<Operation>
1
Press the “ MENU ” button.
2
Press the “
#
” button and
select [ ], then press the
“ ” button to confirm the
selection.
3
Press “ ” and select the
mode which meets your
purpose from [
AUTO ], [ ],
[ ], [ ], or [ ]).
4
Press “ MENU ” button to turn
off the menu display.
5
Press the shutter release
button to take the picture.
Display
appearance
when [
]
is selected.
Exposure Compensation
<Operation>
1
Press the “ MENU ” button.
2
Press the “
@
” or “
#
” button
and select [ ], then press
the “ ” button to confirm the
selection.
3
Press “
%
” or “
fi
” button to
select the desired amount of
exposure compensation, then
press the “
” button to
confirm the selection.
Display
appearance
when +0.7
is selected.
This function provides a range of compensation for exposure.
Press the “
%
” button
to increase the
amount of exposure
(+), and the “
fi
”
button to decrease
exposure (–).
+2.0
⋅
⋅
⋅
+0.7
% fi
+0.3
% fi
±0.0
% fi
–0.3
% fi
–0.7
% fi
–1.0
⋅
⋅
⋅
–2.0
4
Press the “ MENU ” button to
turn off the menu display.
5
Press the shutter release
button to take the picture.
¶
During flash photography, exposure
compensation is limited to the
range of ± 1.0 step, regardless of
the value shown in the display.