Using the External DVD SuperMulti Drive
28
❖
If you add data to a DVD-R and DVD+R disc that
you have already recoroded to, you might not be able
to read the added data under some circumstances.
It cannot be read in 16-bit operating systems, such as
Windows 98SE and Windows ME. In Windows
NT4, you will need Service Pack 6 or later to read
added data. In Windows 2000, you will need Service
Pack 2 or later to read it. Some DVD-ROM and
DVD-ROM/CD-R/RW drives cannot read added
data regardless of the oprrating system.
❖
RecordNow! does not support recording to
DVD-RAM discs. To record to a DVD-RAM,
use Explorer or other utility.
❖
When you back up a DVD disc, be sure the source
drive supports recording to DVD-R/-RW or
DVD+R/+RW discs. If the source drive does not
support recording to DVD-R/-RW or DVD+R/+RW
discs, it might not be backed up correctly.
❖
When you back up a DVD-R, DVD-RW, DVD+R or
DVD+RW, be sure to use the same type of disc.
❖
You cannot partially delete any data written to a
CD-RW, DVD-RW or DVD+RW disc.
Data Verification
To verify that data is written or rewritten correctly, follow
the steps below before you write or rewrite a Data CD.
1
Click the
Options
button on the RecordNow!
Console to open the Options panels.
2
Select the Data in the left-side menu.
3
Mark the Verify data written to the disc after burning
check box in the Data Options.
4
Click the
OK
button.
