Toshiba P200D Maintenance Manual Download Page 147

Page: 147 / 249

4.5 HDD

4 Replacement Procedures

4.5 HDD

CAUTION: When handling the HDD, do not press the top surface. Hold the disk by
the sides to prevent damage and loss of data.

Figure 4-8

HDD

Removing the Main HDD

The Dual HDD feature makes it easy to handle demanding applications while running
background applications such as system backup and virus scans.

Follow the steps below to remove the main HDD module:

Turn the computer upside down.

Remove the black M2.5x4 screw to release the main HDD door.

Main HDD

Figure 4-9

Releasing the main HDD door screw

Satellite P200D/P205D Series Maintenance Manual

[CONFIDENTIAL]

4-13

Summary of Contents for P200D


























































































































































































































































Search results

Summary of Contents for P200D

Reviews:

Related manuals for P200D

Brands by name

Popular brands

Toshiba P200D, Maintenance Manual

Search results

Summary of Contents for P200D

Reviews:

Related manuals for P200D

Brands by name

Popular brands